1x2 VGA Distribution Amplifier with Audio The Model 200A is a 2-channel VGA distribution amplifier (splitter) with stereo audio and EDID routing/emulation capabilities.
KD-HD8X8BT 8 Inputs to 8 Outputs HDBT via Single CAT6/STP Matrix Switcher with Audio Distribution & Compass Control Routing (Please Note: RX Extenders are sold separate, Model Number: KD-CATHD500RX)
Portable (USB) Headphone Amplifier The PHA-1 portable headphone amplifier is a two-channel high resolution DAC (digital-to-analog converter) combined with a high-quality headphone amplifier.
4 Input Transcoder/Down Converter with Genlock Magellan Series Scaling Switchers - 1 Composite, 1 S-Video, 1 Computer and 1 Computer / Component Inputs are switched and trans-coded or down converted to either SD Composite or S-Video outputs or SD or HD component output.
HDBaseT Extender TX/RX Box Set HDMI (Digital Video/Audio)
IR- RS-232 Bi-Directional
Power POH or POE
Supports 1080p up to 600ft using HDBaseT Certified West Penn Cables
HDBaseT Extender TX/RX Box Set HDMI (Digital Video/Audio)
IR- RS-232 Bi-Directional
Power POH or POE
Web-Control - 8Mb storage
Supports 1080p up to 600ft using HDBaseT Certified West Penn Cables
HDBaseT Wall Plate Transmitter HDMI (Digital Video/Audio)
IR- RS-232 Bi-Directional
VGA (Component, S-Video, Composite) With Audio Converts to HDMI Signals
Power
10/100BaseT LAN Port
2 Gang Decora® Style Plate
HDBaseT Wall Plate Transmitter HDMI (Digital Video/Audio)
IR- RS-232 Bi-Directional
VGA (Component, S-Video, Composite) With Audio Converts to HDMI Signals
Power
10/100BaseT LAN Port
USB 2.0 - 2 Port - Extends USB up to 280' to Another Location
2 Gang Decora® Style Plate
One-Fiber Detachable DVI Optical Transmitter & Receiver The 614T and 614R are a small and lightweight, detachable optical transmitter and receiver pair. They transmit uncompressed DVI resolutions of up to 1920x1200 at 60Hz using one multimode fiber optic cable with SC connectors.
Composite Video & Stereo Audio over Twisted Pair Receiver This is a twisted pair (TP) receiver for composite video and unbalanced stereo audio signals. The 718 receives a twisted pair signal from the 717 transmitter and converts it back to composite video and unbalanced stereo audio.
Stereo Audio Power Amplifier (110 Watts per Channel) The 905xl is a high-performance power amplifier for balanced and unbalanced stereo audio signals. It amplifies a stereo audio signal from a preamp and outputs 110 watts RMS per channel delivered into a 4 ohm load.
DisplayPort Repeater The PT-101DP is a repeater for DisplayPort video signals. The unit reclocks and equalizes the signal and can extend the length of a DisplayPort line up to a combined length of 35m (115ft) at resolutions of UXGA/1080p using Kramer cables.
TBUS-10xl Inner Frames The T10F inner frame comes in two different configurations: one dual and one single power sockets, two blank inserts and one cable pass-through (T10F-33), and one with two single power sockets, one blank insert, a cable pass-through & slot for SID-X1
HDMI, Bidirectional RS-232 & IR over HDBaseT Twisted Pair Receiver The TP-580R is a high-performance, HDBaseT twisted pair receiver for HDMI, bidirectional RS-232 and IR signals. The TP-580R receives an HDBaseT twisted pair signal from the TP-580T and converts it back into HDMI, RS-232 and IR signals.
HDMI, Bidirectional RS-232 & IR over HDBaseT Twisted Pair Transmitter The TP-580T is a high-performance, HDBaseT twisted pair transmitter for HDMI, bidirectional RS-232 and IR signals. The TP-580T inputs HDMI, RS-232, and IR signals and converts them into an HDBaseT twisted pair signal transmitted to a TP-580R receiver.
HDMI, Bidirectional RS-232 & IR over Extended Range HDBaseT Twisted Pair Transmitter The TP-580TXR is an extended range, HDBaseT twisted pair transmitter for HDMI, bidirectional RS-232 and IR signals. The TP-580TXR inputs HDMI, RS-232, and IR signals and converts them into an HDBaseT twisted pair signal transmitted to a TP-580RXR receiver
1:5 3G HD-SDI Distribution Amplifier The VM-5HDxlN is a high-performance distribution amplifier for 3G HD-SDI signals. The unit takes one input, provides reclocking and equalization, and distributes the signal to five identical outputs.
Computer Graphics Video & HDTV Scan Converter The VP-501N is a scan converter for computer graphics and HDTV component video signals. It converts the input up to UXGA (1600x1200) and HDTV (1080i)to composite and s-Video (Y/C) signals simultaneously in either PAL or NTSC formats.
DVI & Computer Graphics Video Scan Converter The VP-506 is a high-quality scan converter for down-scaling DVI, computer graphics (VGA) and component video (YPbPr) to PAL or NTSC video. It supports VGA up to UXGA, as well as component resolutions up to 1080p.